TaeguTec has extended its DRILL-SFEED indexable 3-flute drill system by introducing the 3ED-K+ head — a new interchangeable drill head engineered for cast-iron machining. The addition completes the DRILL-SFEED head family, alongside the existing 3ED-P+ general-purpose head and the 3ED-F flat-bottom variant, providing manufacturers with a dedicated, optimised solution for grey, nodular, and malleable cast-iron applications.
With the relentless rise in carbide costs, the indexable 3-flute DRILL-SFEED is the ideal solution for highly productive, cost-effective drilling of cast iron. The 3ED-K+ head features optimised cutting-edge geometry tailored to the specific characteristics of cast iron. This material demands precise edge preparation and advanced coating technology to achieve consistent hole quality and extend tool life. The K+ design delivers the same reliable self-centring capability as the P+ head, ensuring positional accuracy on entry without the need for a pilot hole. A quick-change head system allows worn heads to be replaced in seconds without removing the holder from the machine, minimising downtime and keeping spindles cutting.
The remarkable new K+ head delivers impressive results compared with the general-purpose P+ alternative when machining cast iron. On nodular cast iron, the 3ED-K+ achieved a tool life of 100.8m, compared with 65.8m for the P+ head, a 53% improvement under identical cutting conditions of 110m/min, 0.7mm/rev feed and 50mm depth of cut at Ø16mm. Under test conditions using TaeguTec’s TT5130 grade, the K+ head geometry has proven to be a clear differentiator in driving these performance gains.
The 3ED-K+ heads are available from stock in 0.5mm diameter increments from Ø12.0 to Ø25.5mm, with inch-size variants also included in the range. All heads are compatible with standard DRILL-SFEED holders in 3xD, 5xD, and 8xD configurations, providing versatility across a wide range of hole depths without any change to existing tooling investment. Recommended cutting speeds range from 80 to 180m/min, depending on the cast iron grade and condition, with feed rates from 0.3 to 0.7mm/rev, scaling with diameter.
The DRILL-SFEED 3ED-K+ heads are now available through TaeguTec UK. For application support, cutting data recommendations, or to discuss holder compatibility, contact the TaeguTec UK team via: www.taegutec.com Need technical PR written by a time-served engineer? Talk to Pulse-PR us at https://www.pulse-pr.co.uk/contact/
