Press Releases
Page 52 of 73 | << previous | next >>
ITC Acquires New Anca CNC Grinding Centre
30 September 2013
To support its exceptional levels of growth and the development of new cutting tools and geometries, Industrial Tooling Corporation (ITC) has now invested in an Anca GX7 CNC tool grinding centre. The arrival of the new machine in September complements the four Walter tool grinding centres the Tamworth manufacturer has acquired over the last 12 months. As part of ITC's continual investment p ...
Raising The Bar With Hydrafeed
27 September 2013
Hydrafeed has now raised the bar in technology and quality with the launch of its new MSV80 short magazine barfeed system. The new MSV80 is a full servo-driven barfeed system that eliminates the need for compressed air and by utilising servo technology is unrivalled for performance and accuracy. The new MSV80 barfeed from Hydrafeed incorporates a wealth of technology as standard that can only b ...
Vollmer UK Continues its Growth
27 September 2013
Grinding & Erosion specialist Vollmer UK has announced that its 2012 turnover was an exceptional 35% improvement upon what was previously a successful 2011. The increased turnover at Vollmer UK has seen the company employ three new members of staff and also undertake a complete office refurbishment project. Commenting upon the impressive growth figures, Vollmer UK's Managing Director, Mr Pe ...
ITC Taps Up High Performance With New Thread-making Line
19 September 2013
Industrial Tooling Corporation (ITC) has now extended its formidable range of thread-making products with the launch of the new VariTap series of high performance taps. Launched at the recent EMO exhibition in Hanover by Widia and available in the UK through ITC, the new VariTap incorporates an optimised geometry to deliver exceptional performance levels on a vast selection of ductile materials. ...
ACT is Spot on With New I-Center
19 September 2013
Advanced Carbide Tooling has now launched its new Nine9 Series of I-Center indexable centre drills for improved accuracy, repeatability and tool life whilst also providing reduced tool changeover times. Following its European exhibition debut at the recent EMO event, the new I-Center range of indexable centre drills caused a stir at the show and is already extremely popular with UK customers. A ...
Floyd Focus on OEM Open House Events
16 September 2013
With the plethora of new product launches at EMO in September, the UK's manufacturers of sliding head turning centres will all be hosting Open House events this Autumn. With the Citizen/Miyano event on the 8th to the 10th of October(www.citizenmachinery.co.uk), the Tornos Technology Event from 15 to 17th October (www.tornos.com) and the Star Micronics Open House (www.stargb.com), the UK's ...
OPEN MIND Launches New Version of hyperMILL & hyperCAD at Advanced Engineering
16 September 2013
At the forthcoming Advanced Engineering show at the Birmingham NEC from 12th to 13th November, leading CAM developer OPEN MIND Technologies will be giving its UK exhibition debut to its new hyperMILL 2013 CAM package. The new package offers a number of new, powerful features, extensive functional upgrades and greater ease of use that will be of particular interest to visitors and exhibitors alike. ...
Schunk To Deliver 'Complete Solution' at Advanced Engineering 2013
12 September 2013
AT the Advanced Engineering Exhibition from 12th to 13th November, Schunk will be introducing its Synergy Concept alongside a number of new products that will be unveiled in the UK for the first time. The new products will receive their UK exhibition debut at the event on Stand C88, following the recent launches at EMO in September. A focal point for Schunk will be the promotion of the new Syne ...
Unicut Enhances Lean Credentials with new Durr Cleaning Plant
11 September 2013
The ongoing commitment to investment at Unicut Precision has now seen the Welwyn Garden City subcontract manufacturer install the UK's first Durr EcoCBase W3 component cleaning system. Always at the forefront of technology, the purchase of the UK's first EcoCBase W3 machine not only enables Unicut to clean all its components in-house, it gives the company component cleaning capabilities a ...
Rainford Takes Hard Machining to the MAX with New Cutters
9 September 2013
For the machining of extremely hard and abrasive materials, Union Tool has now developed its new HRRS four flute corner radius end mill. To complement the HRRS, the leading Japanese manufacturer has also launched the HLRS Series for long reach applications. Available in the UK from Rainford Precision, the new additions are ideal for manufacturers from all sectors that demand high precision end mil ...
Page 52 of 73 << previous | next >>