Press Releases
Page 45 of 73 | << previous | next >>
Tool systems for interior boring and testing of ultra precise turned parts
6 May 2014
The miniaturization of turned parts, particularly when internal machining, demands completely new tool philosophies and concepts, as the 'scaling down' of proven tool geometries meets physical limiting factors. The effect on turning tools is magnified as they work with only one cutting edge and are loaded with axial, radial and lateral forces. The loads continually change when turning, wit ...
OPEN MIND Expands Team to Work With Irish Market
1 May 2014
As the market leading provider of CAM software for complex 5-axis machining applications, OPEN MIND Technologies has employed an application engineer to be permanently based in Ireland to develop and support the local market. As an Irishman, Ryan McClure has been working in the UK for OPEN MIND for over three years, dealing with key customers in the aerospace and motorsport sectors. However, th ...
Tornos Sells Machines At MACH 2014
28 April 2014
As MACH debut's go, it couldn't have been better for the ST26 turning centre from Tornos with a sale at the show. Purchased by Precision Aerospace Components (PACE), the ST26 was acquired as part of a company strategy to replace ageing sliding head turning centres. However, the ST26 wasn't purchased just to update older technology; its ability to conduct simultaneous rough and finis ...
Schunk Is Gripped By Success at MACH 2014
28 April 2014
The new Schunk Synergy Concept introduced at MACH 2014 alongside a wealth of new products that were recently unveiled with their World Premiere at the recent EMO exhibition, were the primary factors behind Schunk enjoying such success at MACH. This success was topped off with the company winning an MWP Advanced Manufacturing 'Highly Commended' Award for its Vero-S SPM fixture membrane work ...
More Than a 'Micro' Success at MACH for Rainford
28 April 2014
The announcement of new agencies coming under the umbrella of Rainford Precision prior to MACH, set the stage for the company's most successful event to date. Acknowledged as the UK's leading supplier of 'micro machining' solutions with machine tools and cutting tools for true 'micron' precision, the extension of the Rainford Precision brand at MACH delivered a wealth of ne ...
OPEN MIND Stand Draws the Crowds at MACH 2014
27 April 2014
OPEN MIND Technologies certainly knew how to draw a crowd to its stand at MACH 2014. The benchmark manufacturer of CAM software that is the leading supplier of CAM software to the F1 industry, had a Caterham F1 car on its stand. However, the real crowd puller was the three test pieces on the stand that had been produced in cooperation with the Daishin Corporation to demonstrate the truly remarkabl ...
Floyd Rolls Out New Technologies at MACH 2014
26 April 2014
Floyd Automatic Tooling Ltd believed that its line-up of new products on show at MACH would yield new business; however, the show exceeded all the company's expectations. Some of the new product lines on show at MACH included new cutting tool developments such as the ALESA Twist Coolex, the Schwanog form tools, the new MASTER-Pro patented collets and guide bushes from ECS Swisscollet and th ...
Kerf Burns Up The Competition at MACH 2014
25 April 2014
MACH 2014 got off to a flying start for Kerf Developments as the company sold an RUR2000 high definition plasma cutting table from its stand to a Birmingham company on the first day of the show. The success continued as the Rochdale manufacturer also sold an RUR2500 high definition plasma cutting machine to an Irish steel fabricating company. The two sales at MACH add to the impressive start to ...
ITC Cuts a Fine Form at MACH
23 April 2014
Industrial Tooling Corporation (ITC) has always enjoyed an exceptional level of success at MACH exhibitions, however the recent 2014 event surpassed all the company's expectations. Not only did MACH deliver a record number of strong sales leads, the event also yielded a high level of business from new customers. This new business arrived from manufacturers aiming to identify a solution to a ...
Ellesco Sells Surface Finishing Solutions At MACH
21 April 2014
In the build up to MACH, Ellesco was so confident in the quality and capabilities of its surface finishing, polishing and deburring machines that it was inviting prospective customers to trial their parts at the exhibition. The result was the sale of a Kuhlmeyer ZBS 2 belt long grinding machine and a Timesavers 42 Series rotary brush deburring and radiusing machine. The open invite to potential ...
Page 45 of 73 << previous | next >>