Press Releases

Page 1 of 70 | next >>

‘Clearcut’ Winner For Tackling ACM Delamination Challenges

8 July 2025

‘Clearcut’ Winner For Tackling ACM Delamination Challenges

As the UK’s leading manufacturer of precision cutting tools, Industrial Tooling Corporation (ITC) has launched its new Clearcut range of single flute balanced routing tools, specifically engineered to eliminate delamination issues when machining Aluminium Composite Material (ACM) panels. ACM panels have become increasingly popular in signage, architectural cladding, and display applications. To ...

» Read More

Tool Inventory Where You Need It

2 July 2025

Tool Inventory Where You Need It

Inventory management has become significantly more flexible with the arrival of the TM Minibox from Guhring. Unlike other vending solution providers, Birmingham-based Guhring is elevating accessibility to the next level with the desktop TM Minibox, which is compact enough to fit on any workstation on the shop floor. As a leading UK cutting tool manufacturer, Guhring produces both standard and s ...

» Read More

VOLLMER Unveils Limited Edition VPulse 500

1 July 2025

VOLLMER Unveils Limited Edition VPulse 500

VOLLMER has now launched its VPulse 500 1000 Edition, a highly efficient wire erosion machine that represents a significant leap forward in the manufacturing and maintenance of polycrystalline diamond (PCD) tipped tools. Building upon the proven success of the QWD series, the VPulse 500 1000 Edition is a limited edition machine that offers new levels of precision and efficiency. Proven Technolo ...

» Read More

TaeguTec In the Groove With Small-Diameter Machining Line

1 July 2025

TaeguTec In the Groove With Small-Diameter Machining Line

As a global leader in cutting tool technology, TaeguTec has announced a significant expansion of its innovative WINIGROOVE product line. Designed specifically for small-diameter internal machining applications, the expanded range now includes internal turning, profiling, and threading applications, complementing the original grooving functionality. This presents a comprehensive ‘all-rounder’ for t ...

» Read More

Increased Thread Turning Stability With New Walter TS

28 June 2025

Increased Thread Turning Stability With New Walter TS

Walter has added a new, high-performance tooling system to its portfolio with the new TS thread turning inserts and T1011 threading tools. The most striking special feature of the T1011 tool holder is a carbide pin in the rear asset of the cutting inserts. This new feature prevents wear on the insert seat while the system's claw clamping ensures a stable hold for the TS indexable inserts. ...

» Read More

New End Mill Line is a Star Performer

5 June 2025

New End Mill Line is a Star Performer

TaeguTec has now expanded its renowned StarMill SED 7 range of solid carbide end mills with the introduction of two advanced variants designed to enhance machining performance. The 4XD long type and the chip splitter type have been introduced to provide unparalleled efficiency when machining difficult-to-cut materials such as titanium alloys and stainless steel, offering increased productivity, im ...

» Read More

Rainford In Good Health for MedTech Show

3 June 2025

Rainford In Good Health for MedTech Show

Rainford Precision will highlight its reputation as a leader in ultra-high precision micro-machining at the forthcoming Medical Technology Ireland exhibition. Scheduled for September 24th and 25th at the Galway Racecourse in County Galway, Rainford Precision will present a variety of custom solutions tailored for the Irish medical manufacturing sector at Stand L56. Rainford will present techno ...

» Read More

PCD specialists for the standard programme

7 May 2025

PCD specialists for the standard programme

Walter is enhancing its expertise in the machining of non-ferrous metals with its new range of PCD milling cutters. As most PCD tools are often customised solutions, Walter is also expanding its standard ISO N range with the solid MP271 and MP470 milling cutters. The three-edged MP271 drill slot cutter, available in 16 to 25mm diameter, features a segmented cutting edge length of 30mm and a cent ...

» Read More

Ease of use for CAM models and powerful CAD functions

6 May 2025

Ease of use for CAM models and powerful CAD functions

OPEN MIND has introduced the 2025 release of its hyperMILL® CAD/CAM suite. The new version's highlight is the easy-to-use, automatic deburring function. The 2025 release also includes a new tessellation algorithm and a simplified element display for CAD models, which helps further accelerate the CAD part of the software. Deburred edges and holes are crucial from a functional perspective an ...

» Read More

New specialists for the standard programme

2 May 2025

New specialists for the standard programme

Walter is enhancing its expertise in the machining of non-ferrous metals with its new range of PCD milling cutters. As most PCD tools are often customised solutions, Walter is also expanding its standard ISO N range with the solid MP271 and MP470 milling cutters. The three-edged MP271 drill slot cutter, available in 16 to 25mm diameter, features a segmented cutting edge length of 30mm and a ce ...

» Read More

Page 1 of 70 | next >>

We have been using Pulse PR since 2009 to manage our marketing and PR campaigns and have found their knowledge of the metalworking industry invaluable in securing orders

Mark Lemkey, Managing Director, acs (Air Cleaning Systems)